Showing 1–10 of 12 results

Square Metallic Mesh Type A-F Extra fine screen

  • Using the thinnest wires available, in order to obtain the most screening area capacity. Mainly made in stainless steel, but also available in high carbon steel.

 

  • The wires of this type of mesh are crimped to achieve maximum rigidity.

 

  • The apertures of this range of meshes go from 0.168 mm to 5 mm. (Other apertures on demand)

Square Metallic Mesh Type A Extra fine reinforced screen

  • Designed to withstand large loads, it consists a type A-F extra fine meshes pressed between two electrowelded meshes or type A meshes with a larger aperture. A wide range of aperture combinations are available between each mesh.

Square Metallic Mesh Type A Double crimp screen

  • Manufactured with crimped wires to achieve maximum rigidity.

 

  • Crimped with high precision tools to obtain precise screening apertures.

 

  • They work perfectly in conditions where materials are not sticky or with a high tendency to peg or wedge. With great precision and high performance thanks to their high percentage of screening area.

 

  • The high tensile strength of the steel used allows great resistance to vibration and a long wear life.

Square Metallic Mesh Type A-L Crimped straight wire screen

  • Manufactured with crimped and straight wires in a similar way to type A meshes, so that when tensioning the straight wires it allows a different vibration on the crimped wires, resulting in a self-cleaning effect.

 

  • These meshes have a similar cutting precision to type A meshes.

 

  •  Its self-cleaning properties increase its production capacity.

Square Metallic Mesh Type A Single or double intermediate crimp screen

  • This mesh is similar to Type A mesh, having the same type of crimped wires, but these have intermediate crimps in the apertures making wires more rigid, allowing larger apertures with the same wire diameters.

 

  •  It is used in applications that need big aperture size and small wire diameter.

Square Metallic Mesh Type E Flat top screen

  • This type of mesh is manufactured with wires crimped on one side only, making a flat-top working surface, this extends the screens durability and allows bigger apertures with high precision. It is generally used with coarse material.

 

  •  Its robust, non-deformable structure allows it to work under heavy loads in extreme conditions.

 

  •  Its flat working surface makes it resist heavy wear giving it a higher life span.

Rectangular Metallic Mesh Type B-F Crimped extra fine screen

  • Using the thinnest wires available, in order to obtain the most screening area capacity. Mainly made in stainless steel, but also available in high carbon steel.

 

  • Its rectangular aperture is achieved allowing intermediate crimps between the wires.

Rectangular Metallic Mesh Type C Slotted screen

  • It is formed by wires with different crimping: those which secure the mesh on the small side of the rectangle aperture are type A crimps and those on the long side of the rectangle aperture have a combination of straight and crimped areas.

 

  • This type of mesh has high screening area in its cross bands.

 

  • The slot shape aperture has good self-cleaning effect, making it a good choice for screening humid and sticky materials.

 

  • The direction of the slot varies considerably its application; for more information please refer to the rectangular me-shes section of this catalogue.